Parex Tecgrip C
Parex Tecgrip C is a two-part cementitious anchor grout. The powder component is based on a Portland cement mix with high quality graded silica sands plus a synergistic blend of admixtures. The liquid component is based on a styrene butadiene co- polymer, which acts as the total gauging liquid.
The package is a plastic pail, which will act as the mixing vessel. The pack weights are ready for mixing to a pumpable grout and must be used as supplied. No part mixing. The grout is pumped into place using a Pumpable mortar cartridge gun. Each filling of the gun must be used within 5 minutes to avoid thickening.
The product in the pail must be mixed each time a gun filling is carried out.
The injected grout will tighten in the anchor hole and fix the bolt or other unit into the substrate. Parex Tecgrip C is suitable for fixings into most construction materials including concrete, rock, brickwork, masonry blockwork or other substrates capable of carrying the design load.
Uses include:
- Ties into brick arches
- Overhead rail tracks
- Starter bars and dowels
- Wall ties
- Anchor slots
Specification Outline
Anchor grouting shall be carried out using Parex Tecgrip C as manufactured by Parex Ltd. The product must be stored handled and used strictly in accordance with the manufacturer’s instructions.
Quality Assurance
Parex Limited has an integrated business management system. This is externally accredited by UK CARES to BS EN ISO 9001:2015, BS EN ISO 14001:2015, BS ISO 45001:2018 and BES 6001.
For more information on Parex Tecgrip C click here
