Parex Tecgrip V Winter
Parex Tecgrip V, part of the Tecgrip range of polyester resin anchor grouts, is used for the fixing of steel bolts and bars into pre- drilled holes within concrete, rock, brickwork, stonework, masonry or other substrates capable of supporting the required load. Formed anchors are high strength fixings which are resistant to corrosion and may be loaded quickly after installation. Placed anchors are resistant to vibration, do not exert expansive forces and may be designed for under water installation.
Parex Tecgrip V consists of a low viscosity polyester resin plus a catalysed filler. The two components are mixed to produce a filled resin grout, which may be poured or pumped into suitably prepared anchor holes. The mixed grout is coloured dark grey and is used for downward facing holes where the hole diameter is up to 25mm greater than the bolt or bar diameter.
Uses include:
- Base plates.
- Rail tracks.
- Starter bars and dowels.
- Safety fences and balustrades.
- Reciprocating machinery.
- High impact loads.
Specification Outline
Anchor grouting shall be carried out using Tecgrip V as manufactured by Parex Limited. The product must be stored handled and used strictly in accordance with the manufacturer’s instructions.
Quality Assurance
Parex Limited has an integrated business management system. This is externally accredited by UK CARES to BS EN ISO 9001:2015, BS EN ISO 14001:2015, BS ISO 45001:2018 and BES 6001.
For more information on Parex Tecgrip V Winter click here
To view our full Parex product range click here
